Journal

Back number


Journal No.2
Index
  1. Gain-Scheduled Control of a Flexible Marine Riser under Hydrodynamical Damping Force Varying with the Upper End Velocity,
    K.Ohtsubo, T.Ioki & H.Kajiwara
  2. Research and Development of Biodegradation Disposal for SBS (Sugi Bark Sorbent),
    M.Saito & others
  3. Statistical Characteristics of Winds and Waves around Japan,
    M.Tsujimoto & S.Ishida
  4. A Research on the Vortex Induced Vibration of a Hanging Flexible Riser and Its Stability,
    H.Senga & W.Koterayama
  5. Study on Automatic Position Adjustable Elevator for Workboat,
    M.Nakamura & H.Kajiwara
  6. Experimental Study on Reentry Operation of a Flexible Marine Riser by Gain-scheduled Control,
    K.Ohtsubo & others
  7. The Development of the New Technique which Measures the Unsteady Density Field- The examination on density field reconstruction method -,
    Y. Sanada, Y.Toda & S.Hamachi
  8. A Design of the Liner Ship based on the Logistic Trend Prediction between China and Japan,
    H.Yamato & H.Tanaka
  9. Development of a Weather Adaptive Navigation System - Influence of Weather Forecast -,
    M.Tsujimoto & K.Tanizawa
  10. Study on Tramper Allocation Planning Using Genetic Algorithm,
    H Matsukura & others
  11. Evaluation of Direct Transpacific Liner Service by Simulation,
    H.Tanaka, M.Katsuhara & H.Yamato
  12. A Study on the Shielding Effects among Wind-power Generators in a Floating Wind Farm,
    R.Ogata & others
  13. A Study on Diffusing Aspect and Ventilation of Metallic Fume for Improvement of Working Environment in a Fabrication Shop (Part2 Ventilation in a cubic block),
    N.Fukuchi, K.Izumi & Changhong Hu
  14. Maximum Response Estimation by means of Design Irregular Wave,
    T.Fukasawa
  15. A Study on Knowledge Transfer System in Shipbuilding - Knowledge Acquisition Support System -,
    K.Hiekata & others
  16. A Study of Thermal Stress Based on Metabolic and Radiation Heat for Improvement of Working Environment in Exposed Spaces (Part2 Allowable threshold for working and thermal control measures),
    N.Fukuchi &. J.Takeuchi
  17. Estimation of Welding Distortion Using Neural Network,
    Y.Okumoto & S.Eguchi
  18. Automatic Design for Pipe Arrangement using Multi-objective Genetic Algorithms,
    S.Ikehira & others
  19. Fundamental Study for Automatic Ship Hull Form Fairing,
    T.Katsui & K.Norisada
  20. Study on Residual Stress of Cylinder Generated by Quenching (2nd Report Numerical Analysis Method of Stress caused by Phase Transformation),
    T.Terasaki & others
  21. An Automatic Berthing Control System Design which is Based on Learning Feed-Forward Control,
    S.Iwamoto
  22. Influence of Outrigger Position on the Performaces of a High Speed Trimaran (2nd Report Wave-Induced Motions in Head Sea),
    H.Yasukawa, N.Hirata & K.Kose
  23. Influence of Outrigger Position on the Performanes of a High Speed Trimaran (3rd Report Maneuverability),
    H.Yasukawa, N.Hirata & K.Kose
  24. Evaluation of Ride Comfort using Facial-Expression Analysis Models,
    M.Arima & K.Ikeda
  25. Evaluation of Ride Comfort of High-Speed Passenger Craft (1st Report) - Measurement and Analysis of Ship Motion -,
    M.Arima & Y.Tamura
  26. Estimations of Motions and Added Wave Resistance of Ships Advancing in Waves by a Time-Domain Hybrid Method,
    S.Kataoka & H.Iwashita
  27. Development of the Hull-form of Catamaran by using CFD and Experiment,
    H.Miyata & others
  28. Roll-damping Control by Sail-angle,
    Y.Yoshimura & others
  29. A New Estimation Method of Wind Forces and Moments acting on Ships on the basis of Physical Component Models,
    T.Fujiwara, M.Ueno & Y.Ikeda
  30. Cruising Performance of Ships with Large Superstructures in Heavy Sea (1st Report Added resistance induced by wind),
    T.Fujiwara, M.Ueno & Y.Ikeda
  31. Cavitation Test on a Straight Leading Edge Propeller and a Tip Rake Propeller,
    S.Yamasaki & A.Okazaki
  32. Experimental Identification of Large Parametric Rolling of a Modern Large Passenger Ship,
    Y.Ikeda & others
  33. Ship-Maneuvering Control System Design Based on the Root-Locus Technique,
    S.Iwamoto
  34. Effect of Grooving on Static Strength of Fillet Welded Joint for Ship Structure under Compressive Stress Condition applied by bending moment (2nd Report),
    H.Matsushita, T.Nakai & N.Yamamoto
  35. Effect of Corrosion on Static Strength of Hull Structural Members (8th Report),
    T.Nakai, H.Matsushita & N.Yamamoto
  36. Effect of Corrosion on Static Strength of Hull Structural Members (9th Report),
    T.Nakai, H.Matsushita & N.Yamamoto
  37. Effects of Compressive Plastic Zone at the Fatigue Crack Tip on Propagation Behavior,
    Yiong. Xiong & others
  38. A Study on Fatigue Crack Propagation in Longitudinal Stiffeners of Ship Structures -An analysis of Multiple Cracks Propagation in 3-dimensional Stiffened Panel Structures-,
    T. Okawa & others
  39. Fully Automatic 3-dimensional Hexahedral Mesh Generation -Improved Whisker Weaving Method with Surface Mesh Modification Procedure-,
    Y.Kawamura, Md.Shahidul Isham Y.Sumi
  40. Performance of Buffer Bow Structures against Collision (2nd Report The effect in preventing oil outflow),
    H.Endo, Y.Yamada & Y.Hashizume
  41. Numerical Simulation of Fatigue Crack Initiation and Propagation for In-plane Gusset Welded Joints,
    Y.Nagata & others
  42. Correlation Dimensions Corresponding to Non-periodic Behavior of the Thin Shell under Following Loads in the Circulatory System,
    G.Okahata & N.Fukuchi
  43. Development of Large-scaled FEM for Analysis of Mechanical Problems in Welding,
    H.Nishikawa, H.Serizawa & H.Murakawa
  44. Development of a Set of Simple Formulae for Estimation of Ultimate Strength of a Continuous Stiffened Panel under Combined Loads,
    M.Harada, M.Fujikubo, & D.Yanagihara
page top
Journal No.1
Index
  1. Variable Rotational Speed Control for Fixed-pitch Type Wind Turbines Using LPV Techniques,
    K.Ohtsubo, D.Honda & H.Kajiwar
  2. Intrusion Depth of Discharged Water from Ocean Nutrient Enhancer "TAKUMI" into the Sea with Temperature Stratification,
    A.Bando & others
  3. Observation of Artificial Structures by Autonomous Underwater Vehicle,
    T.Maki & others
  4. Development of a motion mechanism for fish type robots,
    S.Yamaguchi, K.Kagiyama & M.Terada
  5. Concept design of a pentamaran type fast RoRo ship,
    Y.Ikeda, E.Nakabayashi & A.Ito
  6. Sailing Wind Farm as Main Energy Resource with Small Load on an Envir,
    T.Kinoshita & others
  7. Short Distance Radio Positioning System in Shipbuilding,
    T.Iwasaki & others
  8. Physical Burden of Wheelchair Helper at Getting on/off a Car Ferry,
    Y.Okumoto & K.Takashiba
  9. Optimization of Block Allocation in Assembly Area Using Simulated Annealing Method,
    Y. Okumoto & R.Iseki
  10. Influence of Outrigger Position on the Performaces of a High Speed Trimaran (1st Report),
    H.Yasukawa, N.Hirata & K.Kose
  11. A Study on Diffusing Aspect and Ventilation of Metallic Fume for Improvement of Working Environment in a Fabrication Shop (Part 1),
    N.Fukuchi & others
  12. A Study of Thermal Stress Based on Metabolic and Radiation Heat for Improvement of Working Environment in Exposed Spaces (Part 1),
    N.Fukuchi & J.Takeuchi
  13. Improvement of Water Entry Performance of a Free-fall Lifeboat,
    M.Arai & other
  14. Effects of sway motion on roll reduction performance of an Anti-Rolling Tank,
    Y.Ikeda & M.Harada
  15. A wave maker for a circulating water channel and experiments for a high-speed boat in head waves,
    S.Sato & K.Suzuki
  16. A Study on Model Test Method to Assess Safety of Damaged Ship with Flooding from Damaged Opening,
    T.Katayama, Y.Takeuchi & Y.Ikeda
  17. Fuzzy Modelling of Facial-Expression Analysis for Evaluating Ride Comfort,
    M.Arima & K.Ikeda
  18. On the Automatic Collision Avoidance System for Ships (1st Report),
    Y.Furukawa & others
  19. Effect of Corrosion on Static Strength of Hull Structural Members (6th Report),
    T.Nakai, H.Matsushita & N.Yamamoto
  20. Effect of Corrosion on Static Strength of Hull Structural Members (7th Report),
    T.Nakai, H.Matsushita & N.Yamamoto
  21. A Study on Static Strength of Fillet Welded Joint for Ship Structure-Effect of Inclined Angle, Partial Joint Penetration, Gap-,
    H.Matsushita, T.Nakai & N.Yamamoto
  22. Progressive Collapse Analysis of Ship's Hull Girder in Longitudinal Bending Using Idealized Structural Unit Method,
    M.Fujikubo & Zhiyong Pei
  23. Study on Local Strain Distribution Measurement for Structural Members by using Piezoelectric Material and Sensor Array,
    Didik R.Santoso, E.Shintaku & Yue Jingxia
page top